Reading time >30 min.
If I ended up on this site january 2011, everything would have been very new to me. If you feel like this, this page is for you.
The water in EU has generally been ok for many years, but since year 2000 increasing amounts of harmful substances are found in the groundwater and drinking water, for example pesticides from agriculture. I pay a little to be sure to get pure drinking water and to avoid more kidney stones, and I had severe awful pain in 2011 from kidney stone attack.
I know 3 groups of people who want clean water: aquarists, window cleaners and people like me who want clean drinking water without toxic substances.
There are many different methods for purifying water, but everyone agrees that reverse osmosis is the best and most economical method to purify water. The method has been known since 1950 and therefore it is used both industrially and in private homes. There are plants which produce thousands of liters of water per hour.
The pollutants are washed away and lead out into the drain. In order to push the water through the membrane, most reverse osmosis plants need a water pressure of 3 [an error occurred while processing this directive] . Reverse osmosis removes all pollutants such as nitrate, nitrite, fungicides, herbicides, medicine residues, hormones, asbestos, bacteria etc. from the water.
Sailors have been using reverse osmosis to make drinking water from seawater since 1950, when the technique was 'found' by a guy in California. The beauty of the technique is that it makes use of the laws of physics. Many breweries, and other industries that need clean water, use it.
The possibility of reverse osmosis was first discovered by scientist and researcher Sourirajan at University of California in the 1950s. First used for desalination of sea water, reverse osmosis was so promising that the US government launched an extensive research program, which many large companies were involved in. During 8 years of research, and an investment of over $33 million, the most modern and most advanced water treatment technology of our time was born.
A reverse osmosis system typically consists of 2-3 filters followed by a membrane. The membrane is expensive, so you try to filter as much as possible before the water comes to the diaphragm to make it last as long as possible.
Without membrane, no reverse osmosis ! Both filters and membranes are designed as cylinders and are placed into a plastic container, and the vessels are connected with thin plastic hoses. As shown a membrane consists of many thin layers of film with ultra-small pores, which, in principle, only water molecules can slip through.
A reverse osmosis membrane has wholes of µ (0,0001µ). The unit is micron, or just µ. 1 µ er en milliontedel meter eller en tusindedel millimeter (0,001 millimeter).
|Reverse osmosis membranes holes||0,0001µ|
|Calcium carbonat molecule||0,0009µ|
|Nanofiltration removes pesticides from ground water, heavy metals and more|
|Ultrafiltration is needed to remove all vira||0,001-0,1µ|
|Microfiltration removes all bacteria, but not all vira||0,1-10µ|
|smallest particle, that the human eye can see||50µ|
As mentioned above, the membrane is the most expensive part, and therefore one attempts to purify the water as much as possible before the water reaches the membrane.
BEFORE the membrane first a sediment filter is added and then one or two carbon filters and then the membrane, and the pure water comes out of the membrane housing, which also deflect the waste water.
|Sediment filter (right) takes care of the coarsest particles such as sand, rust and lime, while one or more carbon filters (active carbon blockfilter and active carbonfilter) cleans smaller molecules such as chlorine, organic chemical products, etc..|
An active coal block filter (far left) can absorb a little more than an active carbon filter (also called GAC, Granulate Active Coal), but is also a bit more expensive.
The membrane is placed in a membrane housing, and this therefore has two outputs: the farthest discharging the pure osmosis water. Membranes are produced with different capacity, identified by Gallons Per Day
Then the filters and the membrane are placed into the containers, called filter housings and membrane housings (left photo):
The houses are connected with small, white plastic tubes.
Here is a lot of good answers to typical questions, if you have an aquarium.
The pollutants are automatically washed off the membrane and lead down the drain. Here lies the secret to the high efficiency and durability of the systems. The membrane works not as an ordinary filter, which only absorbs impurities, in which bacteria can grow, but has a self-cleaning mechanism that automatically removes the secluded impurities.
A simplified representation of the operation: tap water passed through the membrane, becomes divided into two streams. A stream permeates the membrane, leaving impurities back. The second flow flushes the impurities from the surface of the membrane, and then directly down the drain.
This prevents contaminants from settling on the diaphragm. Thus, it remains clean all the time, which ensures membrane durability. Depending on the model, waste water is around 2-4 times osmosis-water.
See the different ways to connect the unitplant
The tank has a rubber bladder on the inside, which has a certain air pressure on one side. The water then pushes on the other side in and compresses air. If you then open the tap, then compressed air will push water out.
The membrane is a non-return valve on the incoming water side built in. Once the tank is full, and the tap is closed, the water in a so-called 4-way-valve pushes a flask and thus also closes on the waste water side. If there is no pressure, the plant begins working again. Actually, tank and faucet get their supply through a hose that is shared through a T-piece: The water flows through the T-piece, where there is least or no pressure
When the 10-liter tank is empty, a 125GPD plant WITHOUT a pump takes nearly an hour to fill the tank. A similar plant WITH a pump takes only half an hour. Video om vandtank
It is recommended to store water in glass containers. IKEA has many cheap good glass containers
Read more about which filters and when to change them
The cleaner the water, the more water dissolves with other substances, ie. the water absorbs harmful toxins and other wastes better. This function is very important for us humans. The average danish tap water is NOT particularly suitable for this purpose. The purity of the water can be measured. The water in Denmark is 150-500 ppm, lowest where it is soft. I have measured 350ppm at several places in Copenhagen. Filtered water is 10-20ppm, look further down the page.
Certain countries' authorities tolerate up to 500 ppm. 500-1000 ppm is dangerous. 1,000 ppm is the limit of WHO. Some years ago WHO raised the limit from 500 to 1,000ppm. Why did WHO do that? The Global Elite (who owns half the planet) decides what the authorities do and say.
Our groundwater is polluted by all the toxins that are sprayed on the fields. In Denmark the politicians have recently 2017 allowed much more pesticides in the water?
There is probably a reason, why millions of americans have a water filter (reverse osmosis) in the kitchen.
There are many different methods for purifying water. The Egyptians were the first to discover that coal can absorb certain substances. You may know Brita, Dafi, or similar filter pitchers. Coal removes, among others, anthropogenic hydrocarbons (eg. pesticides, odor and taste substances and chlorine).
It's easier and far cheaper than buying water. It works according to a principle called reverse osmosis.
You can measure the electric conductivity in water with a meter. This meter measures particles in the water, that are NOT water - in the unit Parts Per Million, which corresponds to mg/L. Tapwater in the capitol of Denmark, Copenhagen, averages to 350 ppm.
Purified with my water filter it's down at 10 ppm. You do not have to be a professor of microbiology to understand this number.
Billions of plastic bottles are sold: fraud !
There are many different methods for cleaning water. Already the Egyptians found that coal could absorb certain substances. Coal removes, among other things, Man-made hydrocarbon compounds (eg sprayers, odors and flavors and chlorine).
If you want to be good to your body and add less harmful substances, then you'll drink reverse osmosis water, which is much cleaner than normal tap water. If you have heard rumors that it is harmful to drink reverse osmosis water, read dangerous to drink RO Water
The major drawback of reverse osmosis is that the water pressure drops drastically and there is a certain amount of waste water. In addition, the water pressure is important for how well the system works.
Most reverse osmosis plants for drinking water store the water in a water tank (which takes up space), and then you tap the water from the tank. You can now get an osmosis plant without a tank where the pure water comes directly out of the tap.
purified-water.dk • Contact • last update: 11 Jul 2019